International Journal of Engineering Technology and Applied Science

ISSN (Online): 2395-3853






Notice Board :

Call for Paper
Vol. 10 Issue 11

Submission Start Date:
November 1, 2024

Acceptence Notification Start:
November 20, 2024

Submission End:
November 26, 2024

Final ManuScript Due:
November 28, 2024

Publication Date:
November 30, 2024
                         Notice Board: Call for PaperVol. 10 Issue 11      Submission Start Date: November 1, 2024      Acceptence Notification Start: November 20, 2024      Submission End: November 26, 2024      Final ManuScript Due: November 28, 2024      Publication Date: November 30, 2024



Volume VII Issue I

Paper Title
Designing of Multiplier using different Adders: A Comprehensive Review
Author Name
Mohini Yadav, Prof.Balram Yadav, Prof.Anshuj Jain
Year Of Publication
2021
Volume and Issue
Volume 7 Issue 1
Abstract
In modern world of technology we focus on ICs design with low power techniques and also on reduction of area of an IC. In digital circuits the multiplication is very common operation which mostly used in DSP applications and in microprocessors
PaperID
IJETAS/JAN/2021/07

Paper Title
A Comparative Study of Different mechanism of Low Power consumption full adder design
Author Name
Renu Yadav, Prof.Ashish Raghuwanshi
Year Of Publication
2021
Volume and Issue
Volume 7 Issue 1
Abstract
The major style constraints in adder style are space and power dissipation. The ability dissipation in MOSFET is directly proportional to the output load capacitance
PaperID
IJETAS/JAN/2021/11

Paper Title
A Review on Heat Transfer Enhancement in Tubular Heat Exchanger Using Twisted Tape
Author Name
Raghvendra Sahu, Prof. Brijendra Kumar Yadav
Year Of Publication
2021
Volume and Issue
Volume 7 Issue 1
Abstract
Heatexchangersarewidelyusedindifferent typesof industries and engineering applications such as chemical reactors, heat exchangers, petrochemical and oil industries, refrigeration, etc. Thermal performance intensification plays an important role in the design of heat exchangers from an economic pointofview
PaperID
IJETAS/JAN/2021/15

Paper Title
A Review on Internal Combustion Engine Fins
Author Name
Ashutosh Kumar Mishra, Prof. Sujeet kumar singh
Year Of Publication
2021
Volume and Issue
Volume 7 Issue 1
Abstract
When fuel is burned in an engine, heat is produced. Additional heat is also generated by friction between the moving parts. Only approximately 30% of the energy released is converted into useful work while remaining 70% must be removed from the engine to prevent the parts from melting. In air-cooled I.C engine, extended surfaces called fins are provided at the periphery of engine cylinder to increase heat transfer rate.
PaperID
IJETAS/JAN/2021/18